Required Options for the Ventis ME300
|1) Chimney System Required – Questions about chimney? We can help! 866-845-7845
Available Accessories for the Ventis ME300
1) Outside Air Kit
2) Forced Air Distribution Kit – This system allows you to manage the heat distribution automatically. Using a wall thermostat, you can select the temperature you want to maintain in the room where the fireplace is located. Once the thermostat is satisfied, the excess heat is redirected to another room up to 50 feet (15 m) away from the fireplace using a 350 CFM blower. That way, you can enjoy a nice fire in your living room without the discomfort of excess heat generated by your Ventis fireplace.The system can also be used to supplement heat in a room remote from the fireplace. For this type of application, the thermostat needs to be positioned in the desired room and programmed with the temperature to be maintained. The system, now in “heat mode”, will activate the blower as long as the temperature in the remote room is not achieved and that the fireplace has enough heat to distribute.
3) Hot Air Gravity Distribution Kit – Ventis offers you another way to distribute excess heat into your home with the help of a Hot Air Gravity Distribution Kit. The Hot Air Gravity Distribution Kit allows you to block the upper fireplace louver in order to bring hot air into the same room as the fireplace, in adjacent rooms, or upstairs at a maximum distance of 10′(3 m). The minimum height of the hot air duct must be 68″ (1.7 m) measured from the floor to the top of the hot air register.
Ventis ME300 Product Information
Enjoy both the sounds and the heat of a natural fireplace with our Ventis ME300. Thanks to its two standard firescreen doors, the fireplace can be operated with the glass doors opened. Its extra large 4.25 cubic foot firebox is clearly a guarantee for the best looking fire. Although the ME300 is not designed to provide an overnight burn, it is powerful enough to heat up to 1,500 square feet. Get the most out of this truly exceptional fireplace by using its standard blower or installing its optional warm air distribution kit. The features of our ME300 were created without compromise for the environment. Indeed, its emissions have been tested at 2.9 g/kg and are below the Phase II limit of the EPA Voluntary Wood Fireplace Program.
Recommended heating area < 1,500 sq. ft.
Firebox volume 4.25 cu. ft.
Maximum log length 20″
Molded refractory bricks Included
Ventis anchor plate Included
EPA Qualified Yes
Forced air kit
Hot air gravity kit – traditional style
Hot air gravity kit – modern style