Ventis HE200 Product Information
The Ventis HE200 is a zero-clearance wood burning fireplace featuring double retractable doors, blower system, cast refractory bricks, optional firescreen doors, hot air distribution capabilities, and an overnight burn. This eco-friendly fireplace boasts emissions below 3.96 g/h while efficiency tops 75%. With the ability to heat 1,900 square feet, the Ventis HE200 supplies not only warmth, but the traditional style wood fireplace creates an atmosphere of comfort and satisfaction.
Maximum output – seasoned cord wood 65,000 BTU
Recommended heating area 500 – 1,800 sq. ft.*
Firebox volume 2.0 cu. ft.
Maximum log length 16″
Cast refractory bricks Included
Ventis anchor plate Included
120 CFM Blower Included
Fresh air intake adapter Included
EPA Certified Yes
Brushed nickel door overlay
Forced Air Distribution Kit
Hot Air Gravity Distribution Kit – traditional style
Hot Air Gravity Distribution Kit – modern style
Available Accessories for the Ventis HE200
1) Door overlay in brushed nickel
2) Fire screen
3) Outside Air Kit
4) Forced Air Distribution Kit This system allows you to manage the heat distribution automatically. Using a wall thermostat, you can select the temperature you want to maintain in the room where the fireplace is located. Once the thermostat is satisfied, the excess heat is redirected to another room up to 50 feet (15 m) away from the fireplace using a 350 CFM blower. That way, you can enjoy a nice fire in your living room without the discomfort of excess heat generated by your Ventis fireplace.The system can also be used to supplement heat in a room remote from the fireplace. For this type of application, the thermostat needs to be positioned in the desired room and programmed with the temperature to be maintained. The system, now in “heat mode”, will activate the blower as long as the temperature in the remote room is not achieved and that the fireplace has enough heat to distribute.
5) Hot Air Gravity Distribution Kit Ventis offers you another way to distribute excess heat into your home with the help of a Hot Air Gravity Distribution Kit. The Hot Air Gravity Distribution Kit allows you to block the upper fireplace louver in order to bring hot air into the same room as the fireplace, in adjacent rooms, or upstairs at a maximum distance of 10′(3 m). The minimum height of the hot air duct must be 68″ (1.7 m) measured from the floor to the top of the hot air register.