Free with Purchase! Offer valid September 15 to December 31, 2024

Ventis HE325 Wood Fireplace

Look no further than the Ventis HE325 zero-clearance wood burning fireplace for the perfect combination of style and high efficiency. Featuring retractable double doors, the 2.9 cubic foot firebox provides up to 85,000 BTUs comfortably heating 750 to 2,500 square feet. Ventis Logo Emissions are an incredibly low .99 g/h meeting the strictest of EPA standards. The retractable doors allow you to fully enjoy the sights and sounds of a real wood fire. With an optional forced air or hot air gravity kit, you can easily transfer heat to other areas of your home.

Model VB00018
Ceramic panel baffle
72% efficient
EPA rating: .99g/h
85,000 BTU maximum with seasoned cord wood
Recommended heating area: 750 – 2,500 sq. ft.
9-hour burn time
High-efficiency EPA certified appliance
Glass air-wash system
Molded refractory bricks included
Stainless-steel secondary-air system improves gas combustion
176 cfm premium blower included
Maximum log length 18″
Non-catalytic combustion
6″ flue diameter
Firebox volume 2.9 cu. ft.
Retractable double doors
Ceramic glass with 9-3/8″ wide x 11″ high viewing area each door
Unit dimensions: 33-5/8″ wide x 49-1/8″ high x 29″ deep
Forced air kit optional
Hot air gravity kit optional
Rigid fire screen door optional

Back to top

Required for the Ventis HE325 Zero Clearance Wood Fireplace

Traditional style faceplate

Available Accessories for the Ventis HE325 Wood Fireplace

4″Ø fresh air intake register with airtight damper

Hot air gravity kit – traditional

Rigid fire screen

Fireplace carrying handles – for carrying fireplace pre-installation

Forced air distribution kit 300 cfm

25′ insulated flex pipe 6″ diameter

Outside Air Kit

Forced Air Distribution Kit

Manage the heat distribution automatically using a wall thermostat. Select the temperature you want to maintain in the room where the fireplace is located. Once the thermostat is satisfied, the excess heat is redirected to another room up to 50 feet (15 m) away from the fireplace using a 350 CFM blower. This allows you to enjoy the fire in your living room without the discomfort of excess heat generated by your Ventis fireplace. The system can also be used to supplement heat in a room remote from the fireplace. For this type of application, the thermostat needs to be positioned in the desired room and programmed with the temperature to be maintained. The system, now in “heat mode”, will activate the blower as long as the temperature in the remote room is not achieved and as long as the fireplace has enough heat to distribute.

Hot Air Gravity Distribution Kit

Another way to distribute excess heat into your home is with a Hot Air Gravity Distribution Kit. The Hot Air Gravity Distribution Kit allows you to block the upper fireplace louver in order to bring hot air into the same room as the fireplace, in adjacent rooms, or upstairs at a maximum distance of 10′ (3 m). The minimum height of the hot air duct must be 68″ (1.7 m) measured from the floor to the top of the hot air register.