Free with Purchase! Offer valid September 15 to December 31, 2024

Ventis HE275CF Wood Fireplace

Look no further than the Ventis HE275CF for a single door, clean face wood burning fireplace to heat your space in contemporary style. Featuring a hot air gravity system, the HE275CF can easily heat more than one room. Ventis Logo Low emissions of 1.14 g/h coupled with efficiency at 74% meet strict EPA guidelines. The large firebox holds 20″ logs for an 8-hr burn time. Enjoy the ambiance of a true wood fire in modern style with minimalist distinctive louvers complementing both new construction and remodeling wherever you live.

Model VB00017
C-Cast baffles
74% efficient
EPA rating: 1.14 g/h
80,000 BTU maximum with seasoned cord wood
Recommended heating area: 750 – 2,200 sq. ft.
8-hour burn time
High-efficiency EPA certified appliance
Glass air-wash system
Molded refractory bricks included
Stainless-steel secondary-air system improves gas combustion
Hot air gravity kit, available in traditional or modern styles
Maximum log length 20″
Non-catalytic combustion
6″ flue diameter
Firebox volume 2.5 cu. ft.
Large single door
Ceramic glass with 24″ wide x 10-5/8″ high viewing area
Unit dimensions: 36-3/4″ wide x 40-5/8″ high x 27-1/4″ deep
Forced air kit optional
Firescreen door optional

Back to top

Required Options for the Ventis HE275CF

Hot Air Gravity Kit – choose one:

Hot air gravity kit – modern with adjustable pipes

Hot air gravity kit – traditional

Available Accessories for the Ventis HE275CF Wood Fireplace

Firescreen door

4″Ø fresh air intake register with airtight damper

Fireplace carrying handles – for carrying fireplace pre-installation

Forced air distribution kit 300 cfm

25′ insulated flex pipe 6″ diameter

Outside Air Kit

Forced Air Distribution Kit

Manage the heat distribution automatically using a wall thermostat. Select the temperature you want to maintain in the room where the fireplace is located. Once the thermostat is satisfied, the excess heat is redirected to another room up to 50 feet (15 m) away from the fireplace using a 350 CFM blower. This allows you to enjoy the fire in your living room without the discomfort of excess heat generated by your Ventis fireplace. The system can also be used to supplement heat in a room remote from the fireplace. For this type of application, the thermostat needs to be positioned in the desired room and programmed with the temperature to be maintained. The system, now in “heat mode”, will activate the blower as long as the temperature in the remote room is not achieved and as long as the fireplace has enough heat to distribute.

Hot Air Gravity Distribution Kit

Another way to distribute excess heat into your home is with a Hot Air Gravity Distribution Kit. The Hot Air Gravity Distribution Kit allows you to block the upper fireplace louver in order to bring hot air into the same room as the fireplace, in adjacent rooms, or upstairs at a maximum distance of 10′ (3 m). The minimum height of the hot air duct must be 68″ (1.7 m) measured from the floor to the top of the hot air register.