Ventis HE250R Wood Fireplace with faceplate – MSRP 
Ventis HE250R Wood Fireplace
Ventis HE250R zero-clearance wood burning fireplace features a single door contemporary design with straight lines and clean shapes. Designed for heating, the HE250R brings a modern touch,
blending functionality and comfort perfectly. Emissions have been reduced to 1.14 g/h without sacrificing efficiency at 74%. Make your living room cozy and inviting for those cold winter nights or spread the warmth throughout the house with an optional forced air or hot air gravity kit.
- Model VB00015
- C-Cast baffles
- 74% efficient
- EPA rating: 1.14 g/h
- 80,000 BTU maximum with seasoned cord wood
- Recommended heating area: 750 – 2,200 sq. ft.
- 8-hour burn time
- High-efficiency EPA certified appliance
- Glass air-wash system
- Molded refractory bricks included
- Stainless-steel secondary-air system improves gas combustion
- 176 cfm premium blower included
- Maximum log length 20″
- Non-catalytic combustion
- 6″ flue diameter
- Firebox volume 2.5 cu. ft.
- Large single door
- Ceramic glass with 24″ wide x 10-5/8″ high viewing area
- Unit dimensions: 36-3/4″ wide x 40-5/8″ high x 28-5/8″ deep
- Forced air kit optional
- Hot air gravity kit optional – traditional or modern style
- Firescreen door optional
Required for the Ventis HE250R
Modern style faceplate
Available Accessories for the Ventis HE250R
Heat shield for surround or shelf
Firescreen door
4″Ø fresh air intake register w/airtight damper
Hot air gravity kit – traditional
Hot air gravity kit – modern with adjustable pipes
Fireplace carrying handles – for carrying fireplace pre-installation
Forced air distribution kit 300 cfm
25′ insulated flex pipe 6″ diameter
Outside Air Kit
Forced Air Distribution Kit
Manage the heat distribution automatically using a wall thermostat. Select the temperature you want to maintain in the room where the fireplace is located. Once the thermostat is satisfied, the excess heat is redirected to another room up to 50 feet (15 m) away from the fireplace using a 350 CFM blower. This allows you to enjoy the fire in your living room without the discomfort of excess heat generated by your Ventis fireplace. The system can also be used to supplement heat in a room remote from the fireplace. For this type of application, the thermostat needs to be positioned in the desired room and programmed with the temperature to be maintained. The system, now in “heat mode”, will activate the blower as long as the temperature in the remote room is not achieved and as long as the fireplace has enough heat to distribute.
Hot Air Gravity Distribution Kit
Another way to distribute excess heat into your home is with a Hot Air Gravity Distribution Kit. The Hot Air Gravity Distribution Kit allows you to block the upper fireplace louver in order to bring hot air into the same room as the fireplace, in adjacent rooms, or upstairs at a maximum distance of 10′ (3 m). The minimum height of the hot air duct must be 68″ (1.7 m) measured from the floor to the top of the hot air register.
