Inspire 2000 Wood Burning Stove by Osburn

Inspire 2000: starting at $3,049*

For a contemporary solution to heating with wood, the Osburn Inspire 2000 offers clean lines and balanced proportions. Choose from three base options to complement your style: a minimalist base for a sleek and modern look, or add wood storage with either the steel base or the popular soapstone base. The Inspire wood stove meets strict energy and environmental standards with low emissions. Designed for today’s lifestyle and built with lasting quality.

Three base options: steel base, soapstone base, or minimalist base
2.3 cubic foot firebox
Up to 75,000 BTUs
Outside air intake
Optional moulded refractory panel kit
Blower optional
Meets EPA 2020 requirements with emissions as low as 1.54 g/hr

Click Here For Quote

Osburn Inspire 2000 Wood Stove Components and Options

Required Components and Options for the Inspire 2000 Wood Stove

Decorative side panel kit:

Decorative side panel kit

Base kit (choose one):

Steel base

Soapstone base

Minimalist base

Additional Options for the Inspire 2000 Wood Stove

Moulded refractory panel kit

Moulded refractory panel kit for minimalist base

Blower assembly with variable speed control (up to 130 CFM)

Quick connect thermodisc kit

5″Ø fresh air intake register with airtight damper

5”Ø x 4′ insulated flex pipe for fresh air intake kit

Osburn Inspire 2000 Wood Stove OB02042 Specifications

Inspire 2000 – OB02042

Appliance Width:	27-7/8″
Appliance Height with Minimalist Base:	23-1/2″
Appliance Height with Steel Base:	39-1/2″
Appliance Height with Soapstone Base:	39-5/8″
Appliance Depth¹:	24-1/4″
Viewing Area:	20-1/4″ x 9-1/2″
Recommended Heating Area*:	500 – 2,100 sq. ft.
Maximum Burn Time*:	8 hours
Maximum Log Length:	20″ Over Width

¹ Appliance Depth includes ash lip.

*Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.