Napoleon Oakville X4 – GDIX4N-1 Gas Fireplace Insert
The largest in the Oakville™ Series the impressive Oakville™ X4 Gas Fireplace Insert has an exclusive dual burner split flow system that results in a firebox filled 
with a stunning triple flame pattern, and allows the option of independently operating the front and rear burners from 16,000 to 40,000 BTU’s. A superior heat circulating blower comes included with this model and when paired with the Oakville’s air flow improvement directional baffles generates maximum blower efficiency. A stunning triple flame and massive 518 sq. in. viewing area makes this fireplace insert a perfect choice for larger rooms where a passion for luxury is evident.
- Up to 40,000 BTU’s
- Stunning Triple Flame
- Clean Face Design and Flush Finish Accessories
- 24 9/16″H X 34 1/8″W X 18 3/4″D
- Exclusive dual burner split flow system allows for full modulation of both front and rear burners from 16,000 up to 40,000 BTU’s
- Full view design with massive 518 sq. in. viewing area
- SIT Proflame II Electronic Ignition
- Exclusive NIGHT LIGHT™ included
- Premium clean face safety barrier maximizes viewing area
- Directional baffles increase airflow for maximum blower efficiency
- Clean contemporary faceplates and backerplates available
- A wide range of media kits, brick panels and porcelain panels available
- Superior heat circulating blower includedOptional Faceplates 2.5″ And 5″ Widths In 3-Sided Or 4-Sided Configurations
- Faceplates available in black, charcoal (dark grey), gun metal (medium grey), or copper
- eFIRE enabled with app remote control included
Napoleon Oakville GDIX4 Photos & Video
See a Napoleon Oakville X4 – GDIX4N-1 Gas Fireplace Insert Insert you like? Call us at 866-845-7845!
Photo 1: Oakville GDIX4 shown with Old Town Red Brick Panels, Large 3-Sided Faceplate Black, Large 3-Sided Backerplate
Photo 2: Oakville GDIX4 shown with Old Town Red Brick Panels, Small 4-Sided Faceplate Gun Metal, Large 4-Sided Backerplate
Photo 3: Oakville GDIX4 shown with MIRRO-FLAME Porcelain Radiant Reflective Panels, Large 4-Sided Faceplate Charcoal, Large 4-Sided Backerplate
Photo 4: Oakville GDIX4 shown with MIRRO-FLAME Porcelain Radiant Reflective Panels, Small Arched Faceplate Charcoal, Medium 3-Sided Backerplate
Photo 5: Oakville GDIX4 shown with Westminster Brick Panels, Small 3-Sided Faceplate Black, Large 3-Sided Backerplate, Riser Box
Photo 6: Oakville GDIX4 shown with Newport Brick Panels, Small 4-Sided Faceplate Copper, Medium 3-Sided Backerplate
Required Options for the Oakville X4
1) Required Decorative Panels (choose one)
MIRRO-FLAME™ Porcelain Reflective Radiant Panels
Old Town Red™ Decorative Brick Panels
Newport™ Decorative Brick Panels
Westminster Decorative Brick Panels
2) Required Log Set (choose one)
Split Oak Log Set (Included)
Birch Log Set (Optional – available for pre-order)
Driftwood Log Set (Optional – available for pre-order)
3) Venting Kit & Terminal
Available Accessories for the Oakville X4 Gas Insert
Optional Faceplates
Small 3 Sided Faceplate (Optional – may use with 3 sided backerplate)
Small 4 Sided Faceplate (Optional – may use with 3 sided backerplate)
Small Arched 4 Sided Faceplate (Optional – may use with 3 sided backerplate)
Small 4 Sided Faceplate (Optional – may use with 4 sided backerplate)
Large 3 Sided Faceplate (Optional – may use with 3 sided backerplate)
Large 4 Sided Faceplate (Optional – may use with 4 sided backerplate)
Optional Backerplates (Black only)
Medium 3 Sided Backerplate (Optional, 44″ W x 28-1/2″ H outer dimensions)
Large 3 Sided Backerplate (Optional, 47″ W x 30″ H outer dimensions)
Large 4 Sided Backerplate (Optional, 44″ W x 35″ H outer dimensions)
Optional Riser Box (Black only)
Riser Box (Optional – 3″ H x 48″ W)
Oakville gas insert shown with optional Riser Box, no faceplate
Proflame II Remote (Included)
eFire Bluetooth Remote App (Included)
Superior Heat Circulating Blower (Included)
