MF Fire Nova 2 Wood Insert
Nova Wood Insert including Surround: starting at $4,242 *
Renovate your wood burning fireplace with the Nova 2 wood burning fireplace by award winning MF Fire. Nova 2’s contemporary styling will make your fireplace a focal point around which you will create cherished memories. Super efficient, the Nova 2 wood insert qualifies for tax credits. Easy to use, just light a fire in the firebox and relax. Nova 2 burns cleanly with no adjusting necessary. The 2.4 cubic foot firebox holds 22″ logs and puts out enough heat for up to 2,500 square feet with a 17-hour no match restart burn time. Say good bye to drafts and heat loss by updating your old fireplace with this exceptional insert.
- Firebox available in satin black or charcoal
- Door available in satin black, charcoal, or stainless steel
- Surround kit, 32″ high x 44″ wide
- 2.4 cubic foot firebox
- Up to 75,000 BTUs
- Heat up to 2,500 sq. ft.
- Blower included
- Additional options include make-up air kit and reduced clearance kit
- Meets EPA 2020 requirements with emissions as low as 1.9 g/hr
- Qualifies for tax credit
MF Fire Nova 2 Wood Insert Components and Options
Required Components and Options for the Nova 2 Wood Burning Fireplace Insert
Surround:
Door (choose one):
Additional Options for the Nova 2 Wood Insert
» Reduced clearance kit
» Make-up air kit
MF Fire Nova Wood Burning Insert MF03 MF06-SS01 Specifications
Nova 2 Wood Insert – MF03 with MF06-SS01
Surround Width: | 44″ |
Surround Height: | 32″ |
Minimum Fireplace Opening Width: | 33″ |
Minimum Fireplace Opening Height: | 28″ |
Minimum Fireplace Opening Depth: | 16″ |
Back to center top flue collar: | 4-1/4″ |
Viewing Area: | 17-3/4″ W x 13-3/4″ H |
Recommended Heating Area*: | up to 2,500 sq. ft. |
Maximum Burn Time* (no match restart): | 17 hours |
Maximum Log Length: | 22″ Over Width |
*Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.