Majestic Pearl II See-Through Gas Fireplace

Majestic Pearl II See-Through 36: suggested list price starting at $4,379*

Pearl II See-Through Direct Vent Gas Fireplace by Majestic

Provide comforting warmth to two spaces at once with the Majestic Pearl II See-Through gas fireplace.  Several interior options allow you to customize the Pearl II see-through for a traditional or contemporary look.

  • Choose from two fronts and three finishes allowing a unique look for each side
  • Realistic split logs included for a traditional log fire
  • Convert now or later to a contemporary look with a glass firebed
  • Interior panel options include brick or reflective black glass
  • Add an IntelliFire Touch remote control for simplicity
  • Fan kit is optional
  • 36″ model
  • Compare to Heat & Glo ST36TR and Healtilator GDST4336 See Through

Features and Options of the Majestic Pearl II See-Through Fireplace

Required Options for the Pearl II See-Through Fireplace

1) Must choose non-operable front (2 required):

Meridian Decorative Black Mesh Front

Decorative Mesh Front – Black Only

Meridian Contemporary Front Bronze

Contemporary Front – 3 Finish Options

Majestic Black Bronze Pewter Finishes

Additional Features and Accessories for the Pearl II See-Through Fireplace

 
Cottage Red Brick Interior Panels

Cottage Red Brick Interior

Tavern Brown Brick Interior Panels

Tavern Brown Brick Interior

Reflective Black Glass

Reflective Black Glass Interior

Heat Zone: Draw heat from your fireplace to another room in your home, up to 20 feet away. (optional)

IntelliFire Touch Wireless Wall Switch RC150

IntelliFire Touch Wireless Wall Switch RC150 (Option)

IntelliFire™ Touch RC400 Touchscreen Remote Control (Option)

Interior Media Options

Onyx Glass, Sapphire Glass, Bronze Glass, Diamond Glass, and Stones

Majestic Pearl II See-Through Model Specifications

Pearl II See-Through 36 – PEARL36STIN

Appliance Width: 42-1/2″
Appliance Height: 38″
Appliance Depth1: 24″
Appliance Rear Width: 42-1/2″
Framing Height: 38-1/8″
Framing Depth: 23″
Framing Front Width: 43″
Framing Back Width: 43″
Fuel Type: Natural gas or liquid propane by conversion
BTU/hr Input: 38,000 (NG); 35,500 (LP)
Heating Capacity2: Up to 1,700 sq ft
Viewing Area: 33″ x 21-5/8″
Ignition System: IntelliFire Touch

Similar specifications as Heat & Glo ST-36TR-IFT and Heatilator GDST4336

1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

2 This is a general guide, heating capacity may vary based on climate, home efficiency, location of the heater, and air movement in the room.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.

Majestic Pearl II See-Through Front Dimensions

Pearl See-Through Front Dimensions – PEARL36STIN

FireplacePro – Your Fireplace Store!