Pearl II Peninsula 36:
suggested list price starting at $3,709 *
$100 off this fireplace!
Offer ends March 13, 2020
Free shipping in the contiguous 48 states
Call us or you’ll pay too much!
Pearl II Peninsula Direct Vent Gas Fireplace by Majestic
The multi-sided Majestic Pearl II Peninsula gas fireplace creates a stunning room divider providing fabulous views and warmth.
- Traditional split logs included
- Convert to a contemporary glass firebed anytime
- Choose brick or reflective black glass interior
- Add an IntelliFire Touch remote control for ease of use
- Optional fan
- 36″ model
- Compare to Heat & Glo Pier and Heatilator Peninsula
Majestic Pearl II Peninsula Fireplace Features and Options
Required Options for the Pearl II Peninsula Fireplace
1) Must choose non-operable front (2 fronts and 1 end panel required):
Additional Features and Accessories for the Pearl II Peninsula Fireplace
IntelliFire™ Touch RC400 Touchscreen Remote Control (Option)
Pearl II Peninsula Fireplace Specifications
Pearl II Peninsula 36 – PEARL36PRIN
|Appliance Rear Width:||40-1/2″|
|Framing Front Width:||40″|
|Framing Back Width:||40″|
|Fuel Type:||Natural gas or liquid propane by conversion|
|BTU/hr Input:||38,000 (NG); 35,500 (LP)|
|Heating Capacity2:||Up to 1,700 sq ft|
|Viewing Area:||33″ x 21-5/8″|
|Ignition System:||IntelliFire Touch|
Same specifications as Heat & Glo PIER-36-IFT and Heatilator GDFL4136
1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.
2 This is a general guide, heating capacity may vary based on climate, home efficiency, location of the heater, and air movement in the room.
Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.