Majestic Marquis II See-Through Gas Fireplace 42ST

Marquis II 42 See-Through: suggested list price starting at $8,819*

Free shipping in the contiguous 48 states
Call us or you’ll pay too much!

Marquis II See-Through Gas Fireplace by Majestic

The Marquis II gas fireplace adds traditional elegance to your living space with flames mingled throughout split logs. The Majestic Marquis II See-Through boasts a large viewing area and accent lighting.  Enjoy a relaxing atmosphere in not just one, but two rooms.

  • ClearView™ glass offers an unobstructed view of the fire
  • Select two fronts – each side may have a different finish to compliment the room it faces
  • Accent lighting enhances the brick interior
  • Perfectly sized for large and medium rooms
  • Adjustable heat output
  • 42″ model
  • Similar to Heat & Glo Escape See Through

Features and Options of the Majestic Marquis II See-Through Fireplace

Required Options for the Marquis II See-Through Fireplace

1) Must choose non-operable front (2 required):

Majestic Marquis II Contemporary Front in Bronze

Contemporary Front – 3 Finish Options

Majestic Black Bronze Pewter Finishes

2) Must choose interior panels:

Cottage Red Brick Interior Panels

Cottage Red Brick

Tavern Brown Brick Interior Panels

Tavern Brown Brick

Additional Features and Accessories for the Marquis II See-Through Fireplace

Heat Zone: Draw heat from your fireplace to another room in your home, up to 20 feet away. (optional)

IntelliFire™ Touch RC400 Touchscreen Remote Control (Standard)

IntelliFire Wi-Fi module

IntelliFire Wi-Fi module (RC400 or RC150 required for thermostat control) (Option)

Battery Backup Wall Switch for IntelliFire Touch (Option)

Marquis II See-Through Fireplace Specifications MARQ42STIN

Marquis II See-Through 42 – MARQ42STIN

Appliance Width: 60″
Appliance Height: 46-3/8″
Appliance Depth1: 30″
Appliance Rear Width: 60″
Framing Height: 46-1/2″
Framing Depth: 30″
Framing Front Width: 60-1/4″
Framing Back Width: 60-1/4″
Fuel Type: Natural gas or liquid propane by conversion
BTU/hr Input: 57,500 (NG); 52,000 (LP)
Heating Capacity2: Up to 3,100 sq ft
Viewing Area: 39-7/16″ x 35-1/8″
Ignition System: IntelliFire Touch

Same specifications as Heat & Glo ESC-42ST

1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

2 This is a general guide, heating capacity may vary based on climate, home efficiency, location of the heater, and air movement in the room.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.

Marquis II 42 See-Through Front Dimensions

Marquis II 42 See-Through Front Dimensions – MARQ42STIN

FireplacePro – Your Fireplace Store!