Jade Series Linear Gas Fireplace by Majestic

With a ribbon of flame the Jade fireplace helps you unwind. With several features, awesome looks and simple operation, relaxing in front of a Majestic Jade Series fireplace will be your favorite place.

Use a Smart Wall TV™ or Passive Heat kit to mount a TV 12″ above the fireplace, mantel not required
Change the look with a colored glass firebed, natural stones, driftwood logs and LED lighting
A variety of heat distribution systems allow you to direct the heat inside or outside
Available in 32″ or 42″ wide
Comparable to Heat & Glo Cosmo and Heatilator Rave fireplaces

Click Here For Quote

Majestic Jade Series Linear Gas Fireplace Features and Options

Required Options of the Jade Fireplace

1) Must choose non-operable front:

Jade Clean Face Front

Black finish for fronts

Jade Picture Frame Front (now available only in black (not shown))

Additional Features and Accessories of the Jade Fireplace

SmartWall TV Kit – Draw heat from the fireplace to another room, up to 20 feet away using a continuously running fan

Passive Heat: Disperse heat naturally (no fan), allows TV 12″ above fireplace without a mantel

Heat Zone: Draw heat from your fireplace to another room in your home, up to 20 feet away; two kits may be used redirecting up to 25% of the total heat output each

Heat Out: Draw heat from your fireplace and direct it outside, up to 25 feet away

Heat Duct: Redistribute heat from the fireplace via the furnace duct work per kit when run continuously; two kits may be used redirecting up to 25% of the total heat output each

Heat Zone: Up to 2 kits per unit, may be used in conjunction with fan kit

IntelliFire™ Touch RC400 touchscreen remote control (optional)

Reflective Black Glass Interior (optional)

Interior Media Options

Onyx Glass, Sapphire Glass, Bronze Glass, Diamond Glass, Stones, and Driftwood Logs

IntelliFire Wi-Fi module (RC400 or RC150 required for thermostat control) (optional)

IntelliFire Touch wireless wall switch RC150 (optional)

Battery Backup Wall Switch for IntelliFire Touch (Option)

LED light switch (optional)

Jade Series Fireplace Specifications

Jade 32 – JADE32IN-B

Appliance Width:	36-3/4″
Appliance Height:	38-1/16″
Appliance Depth¹:	17-3/4″
Appliance Rear Width:	37″
Framing Height:	36-1/2″
Framing Depth²:	17-3/4″
Framing Front Width:	37″
Framing Back Width:	37″
Fuel Type:	Natural gas or liquid propane by conversion
BTU/hr Input:	19,000 (NG); 16,500 (LP)
Heating Capacity²:	Up to 900 sq ft
Viewing Area:	27-1/4″ x 15-1/4″
Ignition System:	IntelliFire Touch

Same specifications as Heat & Glo COSMO32-IFT and Heatilator RAVE3012-IFT

Jade 42 – JADE42IN-B JADE42IL-B

Appliance Width:	48″
Appliance Height:	33-11/16″
Appliance Depth¹:	17-3/4″
Appliance Rear Width:	49″
Framing Height:	32-3/4″
Framing Depth:	17-3/4″
Framing Front Width:	49″
Framing Back Width:	49″
Fuel Type:	Natural gas or liquid propane
BTU/hr Input:	22,250 (NG); 23,500 (LP)
Heating Capacity²:	Up to 1,200 sq ft
Viewing Area:	39″ x 15-1/4″
Ignition System:	IntelliFire Touch

Same specifications as Heat & Glo COSMO42-IFT and Heatilator RAVE4013-IFT

¹ Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

² This is a general guide, heating capacity may vary based on climate, home efficiency, location of the heater, and air movement in the room.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.