Majestic Echelon II See-Through Linear Gas Fireplace
The Echolon II See-Through’s contemporary linear style creates a unique look in not just one, but two rooms. The LED lit glass firebed sparkles with brilliance and may be customized to create the atmosphere you desire. Get lost in the flames and relax in the warmth and ambiance.
- Add reflective black glass panels, colored glass firebed, natural stones, or driftwood logs for a custom interior
- Select two fronts: a clean face or picture frame front, mix or match for a distinct look in each room
- Illuminate the interior glass firebed with dimmable LED lighting
- Direct warmth to additional areas of your home with optional heat distribution systems
- IntelliFire™ Ignition System with wall switch constantly monitors ignition and ensures safe functioning
- Available in 36″ or 48″ wide
- Similar to Heat & Glo Mezzo See-Through and Heatilator Crave See-Through fireplaces
Echelon II See-Through Gas Fireplace Features and Options
Required Options for the Echelon See-Through Fireplace
1) Must choose non-operable front (2 required):
Additional Features and Accessories of the Echelon See-Through Fireplace
IntelliFire™ Touch RC400 Touchscreen Remote Control (Standard)
Interior Media Options
Onyx Glass, Sapphire Glass, Bronze Glass, Diamond Glass, Stones, and Driftwood Logs
Echelon II See-Through Gas Fireplace Specifications
Echelon II See-Through 36 Rev C – ECHEL36STIN-C
Appliance Width: | 46-3/16″ |
Appliance Height: | 41-3/4″ |
Appliance Depth1: | 17-1/8″ |
Appliance Rear Width: | 46-3/16″ |
Framing Height: | 42″ |
Framing Depth2: | 17″ |
Framing Front Width: | 48-1/4″ |
Framing Back Width: | 48-1/4″ |
Fuel Type: | Natural gas or liquid propane by conversion |
BTU/hr Input: | 30,000 (NG); 27,000 (LP) |
Heating Capacity2: | Up to 900 sq ft |
Viewing Area: | 35-1/2″ x 12-1/2″ |
Ignition System: | IntelliFire Plus |
Same specifications as Heat & Glo MEZZO36ST-C and Heatilator CRAVE4836ST-C
Echelon II See-Through 48 Rev C – ECHEL48STIN-C
Appliance Width: | 58″ |
Appliance Height: | 41-3/4″ |
Appliance Depth1: | 17-1/8″ |
Appliance Rear Width: | 58″ |
Framing Height: | 42″ |
Framing Depth2: | 17″ |
Framing Front Width: | 60-1/4″ |
Framing Back Width: | 60-1/4″ |
Fuel Type: | Natural gas or liquid propane by conversion |
BTU/hr Input: | 40,000 (NG); 34,000 (LP) |
Heating Capacity2: | Up to 1,300 sq ft |
Viewing Area: | 47-1/2″ x 12-1/2″ |
Ignition System: | IntelliFire Plus |
Same specifications as Heat & Glo MEZZO48ST-C and Heatilator CRAVE6048ST-C
1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.
2 This is a general guide, heating capacity may vary based on climate, home efficiency, location of the heater, and air movement in the room.
Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.
Echelon II See-Through Fireplace Manual and Literature
- Echelon II Brochure
- Fireplace Design Guide
- Echelon II Install Manual
- Echelon II Owners Manual
- ECHEL36ST Architect Guide
- ECHEL48ST Architect Guide
- CAD Drawing Echelon II See-Through
- HEAT-ZONE Installation Instructions
- Passive Heat Kit Installation Instructions
- Passive Heat Trim Installation Instructions
- IFT-RC400 User Guide